Titus TAO IOM Bedienungsanleitung PDF herunterladen

TAO-IOM-1.1 3-14-14

Receiving Inspection

After unpacking the unit, check it for shipping damage. If

any shipping damage is found, report it immediately to

the delivering carrier. Store units in a clean, dry location

prior to installation.

Installation Instruction

Step 1:

Remove the front mounting base panel by unscrewing it

from the mounting base as shown in Figure 1.

7$2

TAO – Temperature Ambient Optimizer

Floor Mounted Chilled Beam with Perimeter Heating Coil

Step 3:

Remove the front cover with the help of two screw

drivers by lifting up and pulling out as shown in Figure 3

to have access to the inside of the unit.

Step 2

Uninstall the front cover by taking off the décor strip with

the help of flat head screw driver and unscrewing six

screws as shown in Figure 2.

Step 4:

Unscrew the front accent panels. See Figure 4.

1 2 3

TAO-IOM-1.1 3-14-14Receiving InspectionAfter unpacking the unit, check it for shipping damage. If any shipping damage is found, report it im

TAO-IOM-2.1 3-14-14Step 5:Mount the floor angle to the floor 6 ¾" away from the wall with the help of anchor screws (not included). See

TAO-IOM-3.1 3-14-14Step 9:To access the duct work and piping connections remove outer side panels by unscrewing three screws each from Top

Keine Kommentare

Titus TAO IOM Bedienungsanleitung